- Xhorse VVDI Mini Key Tool Remote Key Programmer Support IOS and Android Global Version
- Transparent practice 7 pin lock padlock + 12pcs/set Lock picks Tools locksmith + 5pcs credit card lock pick set
- Transparent Cutaway 15Piece Lock Picks Set Padlock Practice Lock With Locksmith Tools for Lock Pick Training Trainer Practice
- High quality locksmith tool HU58 2 in 1 Genuine LiShi Locksmith Professional Car/Auto Repair Tools
- Ul050 Blank Key House Door Key Blanks Keys Wholesale
- 3 Buttons 315Mhz Remote Flip Key For Fiat 500 / Dodge (Delphi BSI)
- Mito 3 Button Flip Pcf7946 433mhz Delphi BSI
- Giulietta 3Btn Flip Pcf7946 433mhz M.Marelli
- Original XTOOL X300 Plus X300+ Auto Key Programmer with EEPROM Adapter
- DegeTools Winbag Pump Air Bag Wedge Tools,for windows install
1997 LS400 KEY PROGRAMMING
Key Programming 1. Close all doors.
2. Insert an already programmed master key into the ignition.
3. Turn the key from the OFF to On and back OFF FIVE (5) times.
4. Open and close the drivers door SIX (6) times.
5. Remove the key from the ignition.
6. Insert the new key you want to program into the ignition.
7. Wait 1 minute. The security light will be blinking for this one minute. When it stops blinking your key is programmed. To end programming step on the brake one time.
NOTE: You have 35 seconds to complete steps 1-5 and 10 seconds to complete step 6. If you do not do this procedure fast enough the car will not go into programming mode and your key will not program.
If the security light does not go out after 1 minute start the procedure over again.
