Hot Product
- Xhorse VVDI Mini Key Tool Remote Key Programmer Support IOS and Android Global Version
- Transparent practice 7 pin lock padlock + 12pcs/set Lock picks Tools locksmith + 5pcs credit card lock pick set
- Transparent Cutaway 15Piece Lock Picks Set Padlock Practice Lock With Locksmith Tools for Lock Pick Training Trainer Practice
- High quality locksmith tool HU58 2 in 1 Genuine LiShi Locksmith Professional Car/Auto Repair Tools
- Ul050 Blank Key House Door Key Blanks Keys Wholesale
- 3 Buttons 315Mhz Remote Flip Key For Fiat 500 / Dodge (Delphi BSI)
- Mito 3 Button Flip Pcf7946 433mhz Delphi BSI
- Giulietta 3Btn Flip Pcf7946 433mhz M.Marelli
- Original XTOOL X300 Plus X300+ Auto Key Programmer with EEPROM Adapter
- DegeTools Winbag Pump Air Bag Wedge Tools,for windows install
Now You Place: KeyMam Home » What News
MAZDA 6 remote comtrol programming guide
From: keymam.com Write: keymam Date: 2008/3/5 18:58:32 Hits: 12247
Mazda Keyless Remote Programming
MAZDA 6
1. Open Drivers door and leave open.
2. Lock and unlock the drivers door using the power lock switch on door panel.
3. Insert key into the ignition.
4. Turn key to the ON and OFF position 3 times in 10 seconds. Leave key in ignition.
5. Open and close drivers door 3 times ending with door in the open position.
6. Door locks should respond by locking and unlocking.
7. Press any button on remote 2 times. Dorrs should lock and unlock.
8. If programming a second remote press any button 2 times on it and door locks should cycle again.
9. Remove key from ignition and door locks will cycle again.
10. Test remotes.
